Enter the SecurePlatform expert mode. Type pro enable at the prompt and press Enter. Reboot. Type router at the prompt and press Enter. enable conf t router ospf 1 network 10.201.24.100 0.0.0.0 area 0.0.0.0 network 192.168.40.100 0.0.0.0 area 0.0.0.0 write memory add firewall rule from neighbor to any service OSPF Short explanation of the routing table flags: – U=Up: is to use when destination is directly connected or can be connected over a gateway – G=Gateway: it's a destination that can be connected over a gateway (Router) – H=Host: the destination is a single host – D=Dynamic: the entry is made automatically (e.g. by RIP "Routing Information Protocol“) – M=Modified: the entry was modified automatically |
CHECKPOINT DUMP >